Models B2350 and B2350BWonderluxeTHERMOSTAT CONTROLLED DUAL FUEL CIRCULATOR SERIESIf this heater is not properly installed,
continued...Ensure that a masonry chimney meets the minimum standards of the National Fire Protection Association (NFPA) by ha
Method A. 12” (304.8 mm) Clearance to Com-bustible Wall Member: Using a minimum thick-ness 3.5”
MACHINE SCREWCABINET DOOR KNOBThe cabinet door knob is mounted on the inside of the cabinet door to facilitate shippin
TOOLS• Pencil• Measuring Tape or 6 foot rule• Tin Snips• Drill and 1/8” dia. bit• Gloves• Screwdriver (Blade type)• 5/16” Nu
8. CAST IRON PARTS MUST BE “SEASONED” TO AVOID CRACKING. BUILD ONLY SMALL FIRES ON FIRST USE.9. To prevent injury, do not allow anyone to use th
AS A LOCATION IS SELECTED, KEEP THE FOLLOWING MIND:1. The chimney connection should be as airtight as possible. The heater mu
Two basic types of chimneys are approved for use with solid fuel: Factory-built and ma-sonry. Factory-built chimney must comply with
Your wood stove may be hooked up with a 6” factory built or masonry chimney. If you are using a factory built chimney, it must comply with UL 103 stan
When a metal prefabricated chimney is used, the manufacturer’s installation instructions must be followed. You must also purchase (from
Many people may wish to convert an existing replace to heater use. Usually, safe con-nection of stovepipe to a masonry
Masonry Chimneys have several positive attributes: If properly built, they are quite durable, and most homeowners consider them more at
Comments to this Manuals